Author Archives: Chandler
Author Archives: Chandler
So, your lawn mower won’t start and you have narrowed it down to needing a new battery and now you are overwhelmed with the different options on the market.
Well, after reading this article you will know what to look for to find the best lawn mower battery for you and we will also provide some recommendations on what are some good lawn mower batteries on the market.
When picking out a lawn mower battery their are a few things to look for. Those are
We will look at each one in more depth so keep reading on.
The size of mower batteries is normally the same when it comes to physical size. They are normally around 8.3 inches long, 5.1 inches wide, and 7.25 inches high.
This puts them in the class of U1 by the Battery Council International. U1 batteries however do have some differences among them, and that is where the terminals are located.
For U1L the positive terminal is on the left and for U1R the positive terminal is on the right.
Making sure you pick out a battery with the terminal in the right position compared to your old battery is very important. This is because on most mowers the battery cables are not very long. This means if you pick out a battery that has the opposite position of what your current battery is, then the cords might not reach or really be strained. This is why it is important to get the same one.
If you don’t have a riding lawn mower, but instead have a more high end one that you stand on the back, then it might have a different battery than a U1.
Standing mowers tend to have bigger batteries, so if you have a mower like that, then you need to make sure you know the type of battery it uses. To find out just look at the old one and read it, or better yet take it with you to a mower shop and they can tell you what you need.
You don’t have to buy from the mower shop to get information and can still find the best deal you can somewhere else. It is just important to get all the information you need before buying a new battery.
The next thing you need to know about your battery before picking out a new one is the voltage and amps.
Luckily most mower batteries are 12 volts like car batteries, but this doesn’t mean that they all put out the same amps.
The amps that are really important is the cold cranking amps, which is how many amps are put out for 30 seconds at 0 degrees Fahrenheit.
Starting the mower takes a lot of power, so being able to put out the needed power fast is important.
To find the cold cranking amps for your old battery you can research that battery and then you can make sure you buy a new one that puts out an equal or greater amount.
You don’t want to get a battery that does not put out enough power because it won’t be able to start the mower or if it does it will cause a lot of strain on the battery.
So now that you know what to look for with voltage and amps of a mower battery and also the size and terminal location we can cover a few good options that are on the market. The options we will look at are from:
The first battery we will look at is from chrome battery and it is a 12 volt, 35 amp hour, SLA U1 battery.
It comes in at a size of 7.68 inches long, 5.12 inches wide, and 6.46 inches high. This battery weights 26 pounds.
The cold cranking amps that this puts out is 315 which is more than enough for most mowers.
The positive terminal is located on the left side. The terminals are on the corners which makes it easier to reach the cables to them.
The design of this battery is top of the line and uses AGM design to make it leak free. On top of this it has an 18 month warranty and 60 day money back guarantee, so you should be able to be one hundred percent satisfied.
Customers have really loved this battery and have been happy with it.
People are really impressed with the customer service of chrome battery and the few issues that have came about for people have been resolved fast and in a positive way.
The battery is shipped very well with plastic caps on the terminals to protect them. It also comes with new lug hardware, so you can be sure it is installed with a perfect connect. All this makes this a great battery option.
Next we will look at the EXP1250 which is a smaller battery that is good for smaller mowers.
The positive terminal is on the left side and it uses F1 terminals. The terminals are on the corners which makes it easier to hook up.
The dimensions of this battery is that it is 2.8 inches long, 3.5 inches wide, and 3.9 inches heigh making it so it won’t fit in most normal mowers, but is good for small mowers. The weight is also only 3.3 pounds.
The construction of this battery is good and it will not leak or get damaged easily.
It is an SLA battery and 12 volts, but only 5 amp hours.
It also uses AGM (Absorb Glass Mat) technology, so it can handle a wide range of temperatures. Users however have had mixed results with this battery.
Some people have had issues with it not lasting as long as it is supposed too. Also, the cold cranking power of this battery isn’t high, so if you have a larger mower, then you will need a different battery.
If you however have a small mower, then this might be a good battery option for you.
Another good option for lawn mower batter is one from mighty max.
It is the ML35-12. It is a 12 volt and 35 amp hour battery. The cold cranking amps is 315 which is normally what most people need.
The size of this battery is 7.68 inches long, 5.16 inches wide, and 7.13 inches heigh making it so it will fit into most mowers as well. The weight is also standard at 23.15 pounds.
This battery is an SLA battery and uses AGM construction as well, so it will last a long time and not leak. It even has a one year warranty to ensure you that it will be good quality.Like most of the other batteries on this list the positive terminal is on the left side and this battery has a 30 day money back guarantee to ensure that you are satisfied.
Pretty much every user has been satisfied and this battery has done exactly what it is supposed to do. It can work in most temperatures and can handle shock and vibration really well.
This means that no matter the conditions it will keep working right. It does not die fast and will last you for awhile
The last battery we will look at is the UPG UBCD5745.
The dimensions are Length 7.13inches, Width: 3.01inches, and Height: 6.57inches. The weight is 12 pounds making it lighter than most other batteries and the smaller width helps it fit into some tighter spaces.
The positive terminal is on the right side of this battery, so if you need one on the right side, then this one is for you. It is also an SLA battery that uses AGM construction, so you know that it will be good quality and last.
Users have had good luck using this battery for all kinds of uses, and one of them is lawn mowers.
It is a deep cycle battery, so it is not rated for cold cranking amps, but people have had it in mowers successfully.
Also, most users have had good luck with it lasting for a long time and not being a fast drainer.
Some have had bad ones, but it seems to just be a manufacturing error when people do get bad ones, and it is easy to get it replaced. If your mower needs a right side positive terminal, then this battery is one you should look into.
So now you have a good idea of a few options on the best lawn mower battery market.
This list will help you get started in the right direction on finding a new battery.
Also, after reading this you should know what to look for when shopping for a lawn mower battery and be less overwhelmed about all the options. Just remember the important things of voltage, cold cranking amps, size, and terminal location.
Getting a battery that matches your old one in these categories will help ensure that you get one that will work for you.
There is nothing better than seeing a rich green lawn or the buds of flowers and trees as they begin to bloom in the early stages of spring. Unfortunately, scattered throughout the lush green carpet of grass, and in the flower beds and vegetable gardens you will also see the fluffy yellow flowers of the dreaded dandelion.
While the flowers may seem bright and even pretty in some respects, they represent what has become the number one enemy to those who desire pristine gardens and grass.
The questions most people ask are “what are dandelions, and how do you get rid of them?” This article will reveal the answers to both of those questions, as well as a host of other useful and interesting facts regarding the true nature of dandelions.
Depending on who you ask dandelions may be demonized as a weed or celebrated as a flower. However, neither of these descriptions is wholly accurate. The truth of the matter is that the common dandelion, known to science as Taraxacum officinale, is actually classified as a perennial herb.
The main reason for their classification as an herb is that dandelions are completely edible, from the flower to the leaves and even the tap root itself. As for the perennial classification, this is due to the fact that a single dandelion plant lives between 5 to 10 years on average, with some reportedly lasting as long as 13 years and more.
Whether you love them or hate them, dandelions are very easy to recognize. Their leaves are basal, meaning that they grow at the base of the plant right at ground level. This makes it easier to eradicate dandelions as high grass can block out the sunlight they need for their leaves to grow.
Additionally, the thick batch of basal leaves provides a good grip for pulling the whole plant out of the ground. The standard dandelion leaf is lobed shaped with jagged edges, usually measuring 2 inches across and as much as 10 inches in length.
The stems of the average dandelion can grow up to 18 inches in height. This gives the flower a high platform from which it can spread its seeds when the time is right. The flowers are round and usually bright yellow in color, with small petals that create a feathery appearance.
Despite the colorful nature of the dandelion flower it doesn’t actually attract as many butterflies or bees as many other flowers of similar size, such as clover or henbit. One of the main reasons for this is that dandelions don’t require pollination, therefore their flowers aren’t designed to attract insects.
Dandelions prefer warm climates, such as those found in Western Europe or many parts of the United States. They also do best in direct sunlight, making them especially hard to control in places where summers are typically long, hot and sunny. Bare patches, such as newly tilled soil or old garden beds provide the ideal environment for dandelions, as do short mowed lawns where sunlight can reach the ground in abundance.
Due to their prolific nature, dandelions have come to thrive in many different parts of the world. As a result, they are known by a wide range of names. These names include Irish daisy, priest’s crown, puffball, swine’s snout, cankerwort, yellow gowan, bitterwort, blow-ball and clockflower.
Therefore, depending on the time period and location, the common dandelion might be referred to by any of these names when mentioned in farmer’s almanacs, medicinal manuscripts, or any other materials related to the study of plants and herbs. The name ‘dandelion’ itself comes from the French dent-de-lion, which translates as lion’s tooth.
There are an estimated 60 species of dandelion, although some argue that as many as 2,000 microspecies may exist. Some varieties can be found in various regions across the world, whereas others tend to be specific to one area. The California dandelion, for example, is a species that is only found in the State of California.
The Japanese white dandelion is a species native to Japan, growing flowers with white petals around the common yellow stigma. Two other species, Taraxacum decastroi and Taraxacum lacianense, have been found to only exist in Spain’s Pyrenees and Cordillera Cantabrica mountain regions respectively.
What makes dandelions so hard to eradicate is the fact that they can flower all throughout their growing season which lasts between May and October. This gives them infinite opportunities to produce new plants. The first flowers will begin to show when the average daytime temperature rises above 50 degrees Fahrenheit.
Since the flowers close at night they can survive the colder nighttime temperatures of early spring. Dandelions are at their most prolific stage between May and June, but will keep producing seeds as long as they are allowed to flower.
Another reason why dandelions seem to come from nowhere is that they reproduce asexually. The seed from a single flower can germinate, creating a fresh plant, without any assistance from nearby plants, bees or other insects. Essentially, a single dandelion can populate an entire yard if left alone for long enough.
Furthermore, it only takes as few as 9 days for the yellow flower of a dandelion to turn into the infamous white, puffy ball that is a veritable seed-bomb, just waiting for a gust of wind to unleash the seed-load that averages between 50 to 200 seeds per head. During its lifetime, a single dandelion plant can produce anywhere between 2,000 to 12,000 seeds. The real problem is that each seed has a 90 percent chance of germinating.
It is important to note that dandelion seedlings can take up to 2 years to develop into a full plant. Therefore, even though you might seem to kill all your mature dandelions one year, there may yet be countless seedlings silently biding their time. Furthermore, since dandelion seeds can travel up to 2 miles on a gentle summer breeze your lawn will be susceptible to dandelions no matter how often you spray.
Yet another reason why dandelions keep coming back again and again, even after they are sprayed with herbicides, is that most people spray them at the wrong time. While spraying in the early spring may seem like the right idea, the fact of the matter is that there are several problems with this approach. These include:
Even though dandelions are resilient and extra stubborn in early spring they do in fact have their weak point. The ideal time to spray dandelions is in the fall, preferably after the first couple of deep frosts have hit. This is not only good in terms of killing the dandelions, but it is also good for all other plants that could be affected by the spraying. Advantages to spraying in the fall include:
While herbicides and the like can be very effective at killing dandelions, many people are somewhat hesitant to use such aggressive methods. One such reason is the fact that poisons do not pick and choose which plants to kill. A bad gust of wind or a heavy rain can cause dangerous sprays to travel to parts of a yard or garden where they were never intended for. Fortunately, the following are some safer, more passive methods for eliminating the yellow flowering pests once and for all:
One of the reasons that dandelions thrive in yards is that the average person ‘scalps’ their lawn, creating the right amount of space and access to sunlight for weeds and dandelions to grow and thrive. By letting your grass stay at 2 to 3 inches in height you will choke out existing plants, as well as significantly reducing the opportunity for dandelion seeds to take root in the first place.
Despite having a notoriously deep tap root, the good thing about dandelions is that they don’t have an elaborate root system. This means that in order to remove the dandelion completely you simply have to dig up the single tap root. There are tools made specifically for this task, however a conventional garden trowel will also do the trick. Simply dig around the tap root until the dandelion feels loose enough to pull out.
This is another way to keep the ground covered, making it harder for dandelion seeds to find a spot to grow. When you leave your grass high and don’t rake the clippings you virtually eliminate any space where dandelions would otherwise thrive.
If you pull the dead vegetable plants from your garden each year, be sure to sow some ground cover seeds to cover the bare patch left behind. Dandelions seek out bare patches in lawns, forming thick stands in a very short space of time. By planting clover or some other fast growing, dense ground cover you can fill any bare patch before the dandelions get a chance to move in.
Despite the negative rap that dandelions get amongst the gardening and pristine lawn communities, the fact of the matter is that they are actually beneficial in a great many ways.
From helping to keep the soil loose, thereby allowing other plants to spread their roots more easily, to actually possessing properties that can increase physical health and wellbeing when consumed, dandelions can prove very useful if you choose to allow them to live in your yard.
Dandelion leaves can be made into tea, or can be eaten in salad. When harvested in late summer they are less bitter, having a flavor comparable to other big leaf vegetables. Some of the benefits of dandelions include:
As already mentioned, the tap root of a dandelion can help to keep soil from becoming tightly compacted, thus creating a more aerated environment for other plants to take root in. Additionally, the tap root actually transfers nutrients from deep in the soil to the often nutrient-depleted top soil layer. This means that shallow root plants are better fed without the need for fertilizers and other nutrient additives.
Whether you drink dandelion tea or eat the leaves as a salad, the properties of the dandelion will help to improve digestion. Additionally, it will help to increase appetite, making it an ideal aid for anyone recovering from illness.
Consuming dandelions is an excellent way to increase your antioxidant intake. This will reduce the aging process of cells, thereby reducing visible signs of aging. The antioxidants will also help to fight free radicals in the brain, thereby improving memory and cognitive performance.
Studies have shown that consuming dandelions regularly can significantly reduce the risk of certain cancers, as well as regulating blood sugar levels, thus helping to fight diabetes. Furthermore, dandelions have been shown to reduce cholesterol, fight high blood pressure, and even increase a person’s immune system, helping them to fight off common illnesses and infections.
Whether you like it or not, it cannot be denied that the common dandelion can in fact be a very beneficial plant. From helping to enrich and aerate the soil to providing health benefits and home-made remedies, dandelions are regularly used and revered in many parts of the world.
However, the aggressive nature and the high durability of the plant also make it hard to control, causing farmers, gardeners and lawn enthusiasts to despise the sight of those yellow flowers. Fortunately, now that you have read this article you will know how to both use and eradicate dandelions, depending on your preference!
Redecorating a room can be a fun and satisfying experience, giving you the chance to put your artistic abilities to the test. However, when certain obstacles and pitfalls are present, that fun and satisfying experience can turn sour real fast.
One of the biggest examples of this is when your redecorating project involves painting over a wall that was previously covered with wallpaper.
When you have completed the laborious task of removing the wallpaper you find large splotches of wallpaper glue still on the wall. The question is, do you have to remove that glue residue, or can you paint over wallpaper glue?
If you take the time to research the subject you will find that almost every single source will tell you that wallpaper glue must be removed in its ENTIRETY. You won’t find any subtlety in this debate.
No-one will tell you that removing most of the glue is good enough. Basically, the general consensus is that if you don’t remove every molecule of the glue you will wind up regretting it.
The main reason for this is that the glue used for wallpaper is usually water based. This means that when it comes into contact with any water, including water based paint, it will reactivate, no matter how dry or how old it is.
This will result in the glue bubbling in places, as well as the paint not actually adhering to the wall where the glue is present.
Eventually any painted area with glue will chip away, or simply look distorted or smudged. Thus, even though painting over dry glue may seem like a safe enough idea, it is actually the worst thing you could possibly do.
Fortunately, there are several solutions that will enable you to overcome this dilemma.
There are some paint primers and sealants that actually claim to solve the problem of painting over wallpaper glue without having to remove it.
These products are the latest and greatest results of sealant technology, promising to deliver in ways that previous products could never hope to.
Several of these sealants are designed to penetrate porous surfaces, thereby preventing the common issue of walls ‘soaking up’ coat after coat of paint. This is particularly helpful with older walls which have become extremely dry over time.
However, in this case the important feature of these sealants is that they create a hard surface, forming an impenetrable barrier between the paint and the underlying wall, including any glue or other residue on the wall.
In essence, these products promise to deal with the issue of reactivating the glue without it affecting the paint in any way shape or form.
Should you choose to take this approach you only have to follow the instructions on the sealant, which usually includes cleaning all surfaces well before application. You will also need to allow the primer to dry for as long as 24 hours before you begin painting.
What makes most people choose to try to paint over wallpaper glue in the first place is that they find it almost impossible to remove. This is usually because many people try to remove the glue in a dry state.
Unfortunately, this is when the glue is at its strongest, meaning that it is very difficult to remove and may actually cause damage to the drywall as a result.
Fortunately, there are several wallpaper glue removal techniques that are quick and easy, and best of all they won’t cost you anything at all.
This technique is used by scores of professional painters around the world. It is considered highly effective and requires no additional chemicals or other products. The steps for using this technique are as follows:
The vinegar technique is another homemade remedy used by numerous painters and carpenters around the world. The premise is the same as the dish soap technique, using a mix of water and vinegar to reactivate the glue, thereby making it easier to remove.
The steps are as follows:
While there are primers designed to allow you to paint over wallpaper glue the simple truth is that you won’t be saving any time or effort by using them. In fact, they can require more time and effort, as well as more money.
Therefore, the best solution is to use the home remedies developed by the professionals. This will save you all sorts of time, effort and money.
If you want to go the extra mile, however, you can always combine techniques, using a glue removal technique in addition to the professional sealant. This will guarantee the best results for any painting project.